RC - CLIMAVENETA PROCESS GROUPE MULTIFONCTION AIR/EAU i-NX-Q-Y 0152P - 0552P

Image RC – CLIMAVENETA PROCESS GROUPE MULTIFONCTION AIR/EAU i-NX-Q-Y 0152P – 0552P

i-NX-Q-Y 0152P - 0552P
INTEGRA unit for 4-pipe systems, air source for outdoor installation, VFD scroll compressors
44,7 - 152 kW

product iconproduct iconproduct iconproduct iconproduct iconproduct iconproduct iconproduct iconproduct icon
  • format_align_leftDescription
    Multi-purpose outdoor unit for use in 4-pipe systems for the simultaneous production of chilled and hot water by means of two independent hydronic circuits and VFD compressors. These units are able to satisfy the demand for hot and cold water simultaneously through a system that does not require seasonal switching and is therefore a valid alternative to traditional plants with chiller and boiler. Unit with two independent refrigerant circuits, each circuit works with an inverter driven hermetic rotary Scroll compressors using R410A, axial fans, braze-welded plate-type exchanger and thermal expansion valve.

    Versions

    • - - Basic
    • SL - Super-low noise version

    Configurations

    • - - Basic function

    Features

    • UNIQUE PROPOSAL
      Unit designed to satisfy the cold and the hot side requirements simultaneously, for 4-pipe systems without any particular operation mode setting
    • ENERGY SAVING
      Energy saving guaranteed by the advanced operation’s logic and inverter driven compressors, which allow to product always the perfect load in every working mode.The best operation mode is set completely automatically and independently by the unit’s controller, in order to minimize the absorbed energy whatever the cooling and/or heating demand might be
    • ErP READY
      The highest level of efficiency at part load can meet and exceed the minimum seasonal efficiency for heating, SCOP and for cooling, SEER, according with the eco-sustainable design requirements for all products using energy.
    • INTEGRATED HYDRONIC GROUP
      The built-in hydronic module already contains the main water circuit components; it is available with single or twin in-line pump, for achieving both low or high head, fixed or variable speed, available for both plant and recovery circuits (up to 4 pumps).
    • WIDE OPERATING RANGE
      The accurate condensation control (variable fan speed regulation as per standard on every model) and devoted kits allow unit's operation in chiller from -10°C to 46°C of outdoor air temperature, from -10°C to 20°C of evaporator leaving water temperature and hot water production in heat pump mode up to 60°C with possibility to operate down to -15°C of external air temperature.
    • VARIABLE FREQUENCY DRIVE COMPRESSORS
      Unit with 2 separate and indipendent refrigerant circuits each equipped with variable speed drive compressor to achieve best possible efficiency at partial load and deliver always requested load with maximum precision in all working conditions.

    Accessories

    • Touch Screen visual display
    • Set-up for remote connectivity with ModBus/Echelon protocol cards
    • Hydronic kit available in different configurations with 1 or 2 pumps fixed speed or variable speed, for achieving both low or high head, available for both plant and recovery circuits.
    • EC fans with electronic DC brushless motor
    • LOW NOISE KIT (only on no silenced versions)

  • keyboard_hideContrôles

    Control

    • Electronic control W3000+
      The brand new W3000+ controller offers advanced functions and algorithms. The Large keypad, as standard equipment, features function controls and a complete LCD display for viewing data and activating the unit, via a multilevel menu, with settable display language. In addition to or as an alternative, the KIPlink is available - Keyboard In Your Pocket - is the innovative user interface based on WiFi technology that allows one to operate on the unit directly from the smartphone or tablet. Using KIPlink, it is possible to turn the unit on and off, adjust the set-point, plot the main operating variables, monitor in detail the status of the refrigerant circuits, the compressors, the fans and the pumps (if present) and display and reset the possible alarms. The regulation features the continuous modulation of capacity, based on sequential adjustment + DIP referring to the leaving water temperature. Diagnostics include complete alarm management, with “blackbox” functions (via PC) and alarm log (display or PC) for best analysis of unit be haviour. The built-in clock can be used to create an operating profile containing up to 4 typical days and 10 time bands, essential for efficient programming of energy production. Optional proprietary devices can perform the adjustment of the resources in systems made of several units. Consumption metering and performance measurement are possible as well. The variable primary flow control is always available as per standard (VPF.E function). Supervision is available with different options, using proprietary devices or by integration into third party systems using ModBus, BACnet, BACnet-over-IP and Echelon LonWorks protocols. A dedicated wall-mounted keypad can be used for remote control of all the functions.
  • find_in_pageFiches Techniques
    openscroll to see all sizes

    Application undefined

    i-NX-Q-Y

    0152P

    0182P

    0202P

    0252P

    0262P

    0302P

    0352P

    0402P

    0502P

    0552P

    openscroll to see all sizes

    Application undefined

    i-NX-Q-SL-Y

    0152P

    0182P

    0202P

    0252P

    0262P

    0302P

    0352P

    0402P

    0502P

    0552P

  • picture_as_pdfTéléchargement
    • picture_as_pdf BROCHURES

      INTEGRA PROCESS

      cloud_download
    • picture_as_pdf GENERAL CATALOGUES

      PROCESS PRODUCT GUIDE

      cloud_download
    • picture_as_pdf TECHNICAL DOCUMENTATIONS - REGULATION (EU) N. 813/2013

      i-NX-Q-Y SCOP

      cloud_download
    • picture_as_pdf PRODUCT OVERVIEW

      PROCESS OVERVIEW

      cloud_download